Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy Characterization of Adhesive Produced From Polystyrene Waste

In this study, the optimized adhesive formulated from polystyrene waste was characterized for Fourier transform infrared (FTIR) spectra, Scanning Electron Microscopy (SEM) / Energy Dispersive X-ray (EDX) spectroscopy, solubility, density and water absorption for identification of existing functional group(s), morphology, elemental compositions, etc. The results revealed that polystyrene, unsaturated hydrocarbon has been degraded to form a new product containing aromatic compounds. SEM morphology showed well mixed blended adhesive with silver-like appearance due to additives and EDX revealed 12 existing elemental compositions with their corresponding percentage atomic weights as follows; carbon 93.14 %, hafnium 1.44 %, vanadium 1.66 %, chromium 1.40 %, bromine 0.47 %, palladium 0.26 %, copper 0.43 %, nickel 0.31 %, cobalt 0.29 %, potassium 0.38 %, iron 0.15 % and manganese 0.08 %. The produced polystyrene adhesive was sparsely soluble in water after 30 minutes; it has a density of 1041 kg/m3 and does not absorb moisture. Because of these results, the adhesive from polystyrene waste could serve as green adhesive, since there are no threats of toxic substance emission from the spectral analysis since most of the elements are used as a supplement in pharmaceuticals and catalyst in process industries

Formulation and Characterization of Adhesive Produced From Polystyrene Waste Using Response Surface Optimization

Polystyrene is extensively used in building and construction industry, packaging and transportation of fragile equipment due its low density, high melting point, low thermal conductivity, low water absorption, etc. Polystyrene after usage is usually discarded thereby causing environmental problems. The post-usage of polystyrene has, therefore, been a subject of intense research in recent times. The aim of this work is to produce adhesive from polystyrene wastes. Polystyrene waste (PS) was collected, processed and dissolved in tackifyer and formulated with diphnyle amine and diethylene glycol dibenzoate additives to produce adhesive using 3 levels variables factors and 4 levels testing factors of design expert optimization software. The produced adhesive was further characterized for viscosity, pH, percentages solid and moisture contents for their response surfaces. The results showed that the best fit viscosity for each run was Run 1B> Run 5A > Run 5D> Run 5B>Run 4D based on the regression analysis and analysis of variance (ANOVA). The pH values obtained ranged from 4.0 to 6.3; percentage moisture content was in the order of Run 1B < 5A<4D<4B and percentage solid content was in the order of Run 1B<5A<4D. The best fitted adhesive was run 1B with 5.93 % moisture content; 5A has 7.57 % moisture content and 4D with 8.76% moisture content. The percentage solid content; Run 1B has 67.19 %, 5A has 68.16 % and 4D has 75.50 %. The produced adhesives were found within the standard range of adhesives used in production of particleboard